Monday, October 18, 2010

Kingdom Hearts' Oathkeeper and Oblivion Fini!

Friday, October 15, 2010

Oathkeeper and Oblivion Fini!




Heya! Tonight I'm chilling. Oathkeeper and Oblivion are finished and ready to (sniff) leave. What a trip this project was. I learned some great things about airbrush maintenance. Doing two parts at once really worked the brushes, teaching me how often and thoroughly they need cleaned. May post a tutorial on that, showing a breakdown and reassembly of brushes plus tips and tricks. I also have a number of prop tutorials in mind, based on the props I've made. Any votes? Let me know to see those first!
So what's for Halloween? I STILL DON'T KNOW! Sigh. Tomorrow is packing and crating day, as O & O are off to make a date with Halloween themselves. I do have some interesting ideas about a Nightmare Before Xmas display, but we'll see what happens. To all of you who are requesting props- I will answer your mail in a few days time. You guys are tenacious! Good for you.
It was fun to take the props out for a photoshoot, but I was glad to put them back on their blankets and tuck them safely away, lest a rogue squirrel start lobbing acorns just for jest. Yeah, I know. But that's me. ;) I'm out. I'm freaking tired, boys and squirrels.
Be good to you.
bc

Threatening Traffic, Kingdom Heart's Keyblades, and the Chicken Ranch

Thursday, October 14, 2010

Threatening Traffic

Heya! Spirits are up as this project is coming to a close. And yes, I am a little sad, too. Oathkeeper and Oblivion have been on my list of want to do forever! Many thanks to C, for helping to make that happen.
I'm irritated, though, as after so much work work work, it's all about dry-time now. Boo. Give the compulsive a job and he's happy. Give him dry-time and he's insane! You mean I can't even clean up?! No. Dust, fool. Sigh. K. Shuffles off for a cup of coffee.
Here are the final pics of Oathkeeper and Oblivion. Clear coat in a few moments and then the charms are added tomorrow and yet more dry-time. Then off to threaten traffic with them and take photographs in a number of locales, pack and crate, and away they go. Can't wait to see them in full Org13 regalia!




Next up is a Chicken Ranch sign for, laughably, a chickencoop. A short, fun project headed for Idaho, yo. After that, a number of smaller projects leading into the first of the year, and most importantly- my own Halloween projects that have taken a back seat until now. And what's the dig on Halloween props you ask? Nunya. ;) Because I've yet to have the real time to think and put my hand to them! But I'll post pics and madness soon enough. I'll post the spiffy pics of Oathkeeper and Oblivion. Until then, be good to you.
bc

Cosplay Progress

Thursday, October 7, 2010

Heya. Finally up for air! Oathkeeper and Oblivion in varying stages of bodywork, headed for paint. The charms always present a challenge. Settled on joining the leaf and star-arm for strength. A loose leaf would ding the paint over time.








Ready for paint! These have been a very interesting build. It's funny how there are always a few details you just don"t know until you put both brain and hand to it. How are you going to make that? Dunno.

Paint is going to be awesome, and then good pics. I've been trying to keep an eye out for good places to shoot them, and have come up with zip. Any suggestions welcome.
Paint next!
Be good to you.
bc


Oathkeeper, Oblivion, Bondo, yo.

Monday, October 4, 2010

Heya.

Way cold this morning. No new pics, I know. But we're at that stage where they don't seem to fluctuate much. They're gray.

I'm aiming at nit-picking and odd construction bits this week, like the crown charm for Oblivion and bodyworking the charm for Oathkeeper. I always hate this part- working on a charm that requires a braid instead of chain, because it means the braid has to built into the charm. This also means that the braid must be protected from glue, bondo, primer, and then paint. :)

After some weekend travel it'll be back to the shop to paint! That's the plan. Thanks to everyone who's been interested in this project. And as requested- I'll post more in progress pics, even if it's just 'Oh, look! Bondo!' moments on the photostream. :) If there's a part of the processes or something specific you want to see let me know, and I'll work it in.

And to those of you who are backing up my inbox with requests- Thank you! I'll get to you as soon as I can. I'll have a block of time tonight where I can get to your requests and sort some of them out.

That's it for now! Someone has to turn on that heater out there. That'd be me. Be good to you.
bc

Dipped in Cosplay Awesome

Thursday, September 30, 2010

Dipped in Awesome


Heya. DESPAIR Love it. A sign for the local Monkey Brains 5/10k Trail run. A very hilly course with this new sign to be located oh, three-quarters the way to the top of the last hill! I know- you'd do the same thing.
On the other hand, here are Oathkeeper and Oblivion, beginning to get the look and feel that will shortly lead to paint.




Bodyworking is the most annoying part in a long process like this. Many repeated steps bring these from thought to frp piece, and from there to paint and clear. It's always a little exhausting. But I'm glad to over the hump and feeling charged about how they're beginning to look. When bodywork begins, it's the worst. But after much sanding in awkward places they begin to look and feel smooth and silky. It's because I dip them in Awesome.

That's a lie. :)

It's crazy hard work, but it pays off.
Be good to you.
bc

Buster Cleveland's Fiberglass 101

Monday, September 27, 2010

Buster Cleveland's Fiberglass 101

Buster Cleveland's
Fiberglass 101


Heya! By unceasing demand- Welcome to the FRP/Fiberglass 101 tutorial.

This tutorial will discuss safety, materials, and usage of Frp/ Fiberglass for your cosplay and other art projects. Any further questions, mail me at bustercleveland@gmail.com

Polyester resins carry a distinct aroma. Yum. This is a Styrene Monomer. MEK, acetone, gasoline, etc.- many solvents have this tasty aroma. This should warn you that they're likely fireball prone and something you DON'T want to breathe, yeah?

Work in a WELL ventilated place. Many of these fumes are heavier than air, and will fall to the floor and collect. I use a fan in a window to draw the air/fumes out, and a FLOOR level fan to drive the heavier fumes up and out.

The first thing you should have is a respirator- not just a dust mask. A dust mask is great for particles of dust from grinding or sanding, but will not stop fumes. Keep your respirator bagged, as the filter/cartridges continue to absorb vapor and will be exhausted if left out, leaving you with an expensive 'dust mask'. Use citrus oils, cloves, etc., to check and see if your cartridges need replaced every so often- if you can smell lemon- it's time to replace the cartridges.

BTW... NO SMOKING. “Yoga, FIRE!” Even the fumes from a catalyzing resin will ignite acetone or solvent fumes! An odd odor- and then BOOM! Be careful.

Methyl Ethyl Ketone Peroxide/MEKP- this is the catalyst for polyester resins. If you get this on you you'll get a chemical burn. Remember Fight Club? “THIS, is a chemical burn.” Oh yeah- it can blind you, too. Respect, yo.

Wear rubber gloves whenever you deal with this stuff. The latex in most rubber gloves bothers my skin, so I use a plastic liner glove, and then a rubber outer glove. It's a pain, but it's better than the alternative.

Wear your safety glasses. Pretend you're Dexter.





Polyester Resin- 

Polyester is used in boat-building, fish-tank construction, etc., and of course- all our fav hobby and cosplay projects. They're easy to buy and use, and the results are dependable.
Polyesters are heat-setting resins. Heat alone will cause them to harden if left alone for months. Since you probably don't want to wait that long for your prop or project, you can add a catalyst (MEKP) to make it harden and cure very quickly. The catalyst causes heat, and the resin hardens. That's it in a nutshell. This is called polymerization. This is a one-way ticket- once it's set it's done.

You can adjust the time it takes to set up by varying the amount of MEKP/catalyst added to the resin. Also by using cold or heat. Polyester resins are catalyzed by volume- 6-8 drops of catalyst (MEKP) per ounce of resin= 20-25 min working time at 72 deg Fahrenheit. You'll lose some resin in your learning curve as it catalyzes too quickly and becomes a rapidly hardening blob in the cup. Cuss, and add less next time! So in the summer when temps are roasting- use less MEKP. Winter and cooler weather- it will take longer unless you add external heat, or more MEKP. Start with smaller amounts of catalyst until you have a feel for it. A test batch is a good idea, then you know exactly what to expect.
So it's all about the heat- either by added catalyst or ambient temps. Again- careful with the MEKP/catalyst- if you get it in your eyes, I hear braille is cool.

Many people also use EPOXY resins, which are very similar to Polyester resins, but the ratio of catalyst to resin is very specific- think cooking vs baking. In cooking you can play with the recipe and probably still be successful. Try this in baking and you're just washing out pans for fun. Epoxy is used commonly in marine applications. I don't use it, haven't any experience with it, and therefore say POLYESTER!

On to materials.
Fiberglass matte, cloth, or woven material is actually glass fibers. Dude. The resin and catalyst are mixed, and then brushed onto the cloth or matte glass. The resin then sets up and hardens, forming the glass into the shape it was laid. Some people have even used cotton t-shirts soaked in resin to form the base of those funky shaped audio speakers.

What you're probably looking to use are called chopped strand matte, and is what will come with most store-bought kits. There are many more options here from heavy construction 'wovens' for strength, to cloth and 'veil'- a very thin glass for uber-detail work. Usually all you need is the chopped strand matte.

I know, I know- so here's the skinny.

Take all your safety precautions- ventilation, glasses, gloves, respirator, and a clean work space. Spread out a plastic garbage bag or lay out a pieces of cardboard larger than the pieces of matte you intend to soak in resin. I use fountain drink cups to mix my resin. Always have a cup of acetone nearby for your brushes and other tools. Use the wooden stir sticks found in the paint dept. for mixing. Use a 'chip' brush to apply the resin to the matt. A chip brush is the standard natural bristle brush with wooden handles. A smaller brush is generally better for details.

Mix your resin and MEKP/catalyst, dip your brush into the resin or pour if you have a lot to dole out at once, and brush it over the matte until no white/dry fibers remain. Lift the piece of very malleable resin soaked glass, and apply it to your project. Use the brush to stipple or dab down the surface so it's smooth. Watch for air bubbles and 'chase' them out to the edges with the brush.

Don't forget to clean out your brushes with acetone when you're finished, or else your brushes are. Always remove any catalyzing resin left over in the cup AWAY from any acetone or solvent- remember? BOOM! The fumes from the catalyzing resin will ignite solvent fumes!

As the resin and glass begins to set it can be cut with a razor knife- again, careful Slash. Cut your excess away while it is still in this 'green' stage and you'll save yourself a lot of time and effort with power tools from saws to grinders.

This is the uber-basic procedure. Set up your project, catalyze resin and wet out your glass fibers, then apply, and cut/finish. After it's set you can apply bondo, gesso, paint, etc. for the finish you want. Oh, yeah- don't add polyester resin to your freshly sculpted foam or foam-core as it will nom nom nom your project and send you into tears. The alternative is to apply coat after coat of white glue to a foam project until it acts like a sealer over which the resin may be applied. This is how the Buster Sword was created.

These are the very basics. On request I'll put together more of these on advanced techniques, gelcoats, bodywork, and construction, but with this basic info and the examples from the Buster Cleveland page you can get started. Do your homework, plan out your build, and ask questions if you don't understand something. Be good to you.
bc

Looking Beyond Keyblades and Bondo

Friday, September 24, 2010





Heya! Coffee's ready! Here are the first run bodywork pics of Oathkeeper and Oblivion. I really hate to start this part, because they're as ugly as they're ever going to be right now. But from here on they only get better, and I am beginning to see the end of the project.

As ever, I'm to that stage where I hate them a little, but very shortly, as they shape up rapidly, I'll be sorry it's about to end. Funny.

You all sure are keeping me busy with your requests! Lots of folks looking way ahead for this year! Time for that coffee, and some more sanding. :)
Be good to you.
bc